|
Suitable tube caliber |
DN25-DN2600(below DN25 nonstandard) |
|
Electrode material |
316L(stainless steel), HC, HB, Ti, Ta |
|
Suitable Medium |
Liquid with conductive ratio more than 5us/cm |
|
Measuring range |
0.1-10m/s (extendable to 15m/s) |
|
Upper limit of span |
0.5-10m/s. 1-5m/s recommended |
|
Accuracy class |
0.3, 0.5, 1.0 |
|
Output signal |
4-20mADC, 0-3kHz, 5V with source and changeable width. High terminal and effective frequency output, RS485 interface |
|
Operation pressure |
1.0MPa, 1.6MPa, 4.0MPa, 16MPa (special) |
|
Fluid temperature |
20-80 degree cetigrade, 80-130 centigrade, 130-180 centigrade,according to liner material |
|
Environmental temperature |
sensor40-80 degree centigrade. Transducer 15-50 degree centigrade |
|
Environmental humidity |
Less than 85%RH (at 20 degree centigrade) |
|
Cable outlet size |
M20*1.5 |
|
Power supply |
220VAC+/-10%, 50Hz+/-1Hz, 24VDC+/-0% |
|
Power consumption |
Less than 8W |
|
Protection ratings Combined type |
IP65 |
|
Separate type |
Sensor IP68, transducer IP65 |
|
Materials of liner |
PTFE, soft rubber etc |
|
Connection of flange |
GB911988(DIN2051, BS4504) |
|
Earthing material |
1Cr18Ni9Ti (stainless steel), HC, Ti, Ta,Cu |
Features:
LDG series electromagnetic flow meter is a kind of electromagnetic induction type flow meter, which consists of sensor and intelligent signal conversion. It can measure the volume flow rate of all kinds of conducting liquids including acid, alkali, salt and strong corrosive liquids and pulp, mud, sewage water and liquid with solid.
Application:
LDG series electromagnetic flow meter is used in the petrochemical, steel, electricity, metallurgy, textiles, food, paper and pharmaceutical industries and for environmental protection and water conservancy projects and other fields. |
Contact Us
