|
Model |
TPUF-008 |
|
Linearity |
0.5% |
|
Repeatability |
0.2% |
|
Accuracy |
+/-1% of reading at rates>0.6 ft/s. +/-0.5% with on-site calibration |
|
Response Time |
0-999 seconds, user-configurable |
|
Velocity |
+/-0.03 ~ +/-105 ft/s (+/-0.01 ~ +/-30 m/s), bi-directional |
|
Pipe Size |
0.5" ~ 240" (15 ~ 6,000mm) |
|
Rate Units |
Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable. |
|
Totaliser |
7-digit totals for net, positive and negative flow |
|
Liquid Types |
Virtually all liquids |
|
Security |
Setup lockout. Access code needed for unlocking |
|
Display |
4x16 character |
|
Communication Interface |
RS-232C, baud-rate: from 75 to 115,200 bps. Protocol made by the manufacturer. User protocols can be made on enquiry. |
|
Transducers |
Model M1 for standard, other 3 models for optional |
|
Transducer Cable |
Standard 5mx2 or can be extended to 10m x2 |
|
Power Supply |
3 AAA Ni-H built-in batteries. When fully charged it will last over 10 hours of operation.100V-240VAC for the charger. |
|
Data Logger |
Built-in data logger can store over 2,000 lines of data |
|
Manual Totalizer |
7-digit press-key-to-go totalizer for calibration |
|
Housing Material |
ABS. Aluminum alloy protective case |
|
Case Size |
100x66x20mm |
Features:
Handheld Ultrasonic Flow Meter is based on clamp-on transit-time flow measurement principle. It measures the flow rate of liquid in a pipe from outside of the pipe by using a pair of ultrasonic transducers. In general, the liquid should be full in the pipe, and should contain very little particles or bubbles. It is applicable for water (hot water, chill water, city water, sea water, etc.); sewage; oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.); chemicals (alcohol, acids, etc.); waste; beverage and liquid food, solvents and other liquids. |
Contact Us
